Michibiki – uncompromising synthetic stone from Kyoto

Tanaka Toishi (Kyoto, Japan)

Grit: 1000 grit - Your best friend for fast and opaque kasumi!
Content: Green silicon carbide, often called “Green Carbon”.
Weight: 935 grams
Dimensions: 219 x 84 x 32 mm
Type: Soaking stone. Soak for 10–15 minutes before use.

Michibiki is a new, Japanese premium series developed by Tanaka Toishi, the same house that manages the mineral rights to the legendary Nakayama mine for natural stones. The series is made for knife enthusiasts seeking uncompromising performance; superior cutting properties, precise feel, and a finish approaching natural stone. Michibiki produces an unusually even, opaque, and hazy kasumi on laminated steel, which is rare among synthetic stones.

“These stones consists of the highest performing materials, and nothing is added to the stone that doesnt need to be there.”
Quote: Tanaka san, during our visit to Kyoto (September 2025)

By this, Tanaka means that the recipe is optimized for performance, not price. A high proportion of expensive abrasive grains and a carefully selected binder provide rapid material removal, clear feedback, and minimal tendency to "glaze" over. The stone is expensive. The performance is absolute.

White or Green stone, what should you choose?

• White (WA / White Alumina): All-round, controlled material removal, fantastic on stainless steel as the stone provides a clean, even surface and holds its shape well.
• Green (GC / Green Silicon Carbide): More aggressive, cuts hard even on tough steels and is known for fast material removal and fine, opaque kasumi when polishing.

Why?

• WA (white aluminum oxide) is often used in medium and finer grits because it cuts quickly but controllably and wears slowly – especially good on stainless steels.
• GC (green silicon carbide, often called “Green Carbon/GC”) consists of harder and sharper grains that remove material quickly, perfect when you want to remove material or enhance contrast in kasumi.

How they feel to use

• Soft but firm feel: Michibiki has a relatively large amount of abrasive grains and less binder, which provides fast material removal with a stable feel.
• Even scratch pattern: Scratches are quickly blurred between steps and softer steels are left with an even, hazy kasumi (especially Green/GC).
• Soaking: 10–15 minutes before sharpening.
• Long-lasting & usually larger format than many standard stones, providing a comfortable “platform” and stable angle control.

Recommended choices based on need

• 320 grit
  Fast thinning and repair of chips. Choose Green GC 320 for maximum material removal or the white WA 320 if you are looking for a slightly "gentler" cut that is still very fast and holds its shape better.
• 1000 grit
  Basic sharpness for the kitchen, daily maintenance:
  - White WA 1000 for a clean, biting primary edge on stainless steel; Green GC 1000 when you want more "bite" and faster work on tougher steels. Green 1000 grit provides incredibly opaque kasumi; we at cleancut are completely amazed by the sharpening power and the even kasumi this stone creates.
• 2000–3000 grit
  Polishing of edge and kasumi:
  - White WA 3000 for a clean, tight finish on the edge; Green GC 2000/3000 when you want to combine speed with hazy kasumi on laminated steel.