Sujihiki
Short sujihiki with a 20 cm long blade.
Weight: 131 gr
Thickness at blade heel: 3 mm
Thickness at spine center: 2.5 mm
Blade height at heel: 30.5 mm
Edge length: 198 mm
Steel: Aogami#2 (63-64 HRC)
Cladding: Iron
Handle: Macassar ebony
Measurements and pictures are of the actual knife that will be shipped. We only have this one in stock.
Toshihiro Wakui is very talented and he makes very well-forged carbon steel knives. In this series, he uses Aogami#2 core steel which he forge-welds with soft iron (warikomi). It is common for smiths to buy pre-laminated steel, but Wakui now forge-welds his own blade material to get it exactly as he wants. The blade's finish is called nashiji kurouchi, which is a rough and blackened surface. Despite the raw finish, Wakui has rounded all edges and given the blade soft forms. He tapers the blades with great skill (tapering from spine to tip) and the knife therefore sits very well in the hand. The handle is octagonal in macassar ebony wood. It has a very nice luster and good weight. Macassar ebony is very expensive, but for this series, the handle needs to have the right weight to match the blade's weight.
Aogami#2 is a carbon steel that is not stainless. Be careful when using the knife as the thin and very hard edge can easily be damaged if you chop into harder particles.
Specs
- Manufacturer: Wakui
- Model: Sujihiki
- Length: 200 mm
- Steel: Aogami #2
- Kolstål | Järnkappa
- HRC: 63-64HRC
- Forging:
- Handle material:
Care & maintenance
Shipping & Returns
Delivery time within Sweden is normally 2-5 working days, 5-14 days within the EU and 7-21 days internationally. We offer free shipping on orders over 1 000 SEK within Sweden. We offer a 90-day return policy. For a return to be approved, the knife must be unused and in its original condition.
Email us here if you wish to initiate a return.